Power Supplies

ELSTAR Elektronik AG can supply you with a wide range of power sources and amplifiers :

High voltage power supplies

		BOP-HV series • Output Voltage ±500 and ±1000 Volt • 40 Watt output power • 4 Quadrant operation (Source and Sink) • Constant current and voltage operation	High voltage bench power supplies
		BHK-MG Series • 40 and 200 Watt output power • 300, 500, 1000 and 2000 Volt models • Fast analogue programming • IEEE488.2 Interface, SCPI compatable • Read/write programming • 2 line digital display	High voltage power source

Swithching power supplies

		RTW series • Low profile chassis • Active Power Factor Correction (PFC) • Output voltages 3.3, 5, 12, 15, 24, 28, or 48V trimmable	Switching power supply
		RKW series programmable power supply • Input 85-265 VAC, 47-440 Hz • Alternative DC input 110-370 VDC • Output voltages 3.3, 5, 12, 15, 24, 28, or 48V • Output voltage controlable from 0V to nominal output uding an external resistor or control voltage 0-5 VDC • Output power 30, 50, 100 and 150 Watt	Switching power supplie
		RKW open frame series • Input 85-265 VAC, 47-440 Hz • Alternative DC- input 110-370 VDC • Output voltage 3.3, 5, 12, 15, 24 28, or 48 Volt • Output power 30,50,100 und 150 Watt • Input sensing for output power compensation (50W Models and above)	Switching power supplies
		Serie RKE • 1500 Watt regulated AC/DC input power source • Output voltage 24VDC or 48VDC • Output voltage adjustable between: 16,8VDC - 31,2VDC or 33,6VDC - 55VDC	Switching power supply
		Serie MTW • Low profile 26 mm chassis • Input 85-265 VAC, 47-440 Hz • Alternative DC- input 110-370 VDC • Output voltages 5, +/-12V • Output power 15, 30 oder 60 Watt	Switching power supplies
		Serie JBW • Input 85-265 VAC, 47-440 Hz • Alternative DC input 110-370 VDC • Output power 10, 15, 30, 75, 100, 150 Watt	Switching power supplies
		HSP Series • Input 90-277 VAC, 125-420 VDC, 47-440 Hz, 1000W • Input 180-277 VAC, 250-420 VDC, 47-440 Hz, 1500W • Output voltage externally controlable from -20% to 110% from the nominal values ranging from 3.3V-48V • Optional "OR-ing"-Diode for parallel conection	switching power supplies
		HSM Series • Input 90-277 VAC, 125-420 VDC, 47-440 Hz, 1000W • Input 180-277 VAC, 250-420 VDC, 47-440 Hz, 1500W • Output voltage adjustable from -30% to 10% from the nominal values ranging from 3.3V-48V • Output voltage/current adjustable over 0- 10v	Switching power supply
		HSF series • output power 50-1500 Watt • Forced Current Sharing for N+1 Redundancy • Hot Swap • Max. 3 Module at 350W , 6 at 150W or 8 at 50/100W per 19" Rack (3 HE) • Output voltage adjustable from -30% to 10% from the nominal values ranging from 3.3V-48V	Switching power supplies

Bench power supplies

		MST Series • Compact housing with uotput power of 200 Watts • Serial and parallel connection between units • Up to 9 MST's in a 4U housing • Shared current mode for N+1 reduntancy	Bench Power supplies
		KLP Series full 1200 Watt characteristic ! • Hyperbolic power characteristic extents power range • Max. output voltage ranges of 20, 36, 75, 150 or 300 Volt, at 1200 Watt • 1200 Watts ar packed into a 1U 19" chassis • Power can be increased by connecting multiple units together	Bench power supplies
		JQE Series • 60, 100, 250, 500 and 1000 Watt output power • High speed regulation for dynamic loads • Low output noise level with high stability • Precise output control using a 10 turn front panel potentiometer • Remote analog input control with scalable input	Bench power supplies
		BOP-1kW series • Output voltage ranges 0 ... ±10V up to0 ... ±100V • 4 quadrant operation (source and sink) • Output power 1000 Watt • Voltage or current modes • Integrated function generator	Bench power supplies
		BOP series • ±20, 36,50, 72, 100 and 200 Volt output models • 100, 200 and 400 Watt output power ranges • Real 4 quadrant operation (Source and Sink) • Constant voltage and current modes • Frequency range (Model dependant) from DC to 24 kHz	Bench power supply
		BHK-MG Series • 40 and 200 Watt output power • 300, 500, 1000 and 2000 Volt models • Fast analogue programming • IEEE488.2 Interface, SCPI compatable • Read/write programming • 2 line digital display	High voltage power source
		ATE series • 50, 100, 250, 500 and 1000 Watt output power • High speed analogue programming • High speed output regulation • Low output ripple	Bench Power Supply
		ATE-DMG Series • 1000 Watt Output power • 40 step sequence program • Fast responding output regulation •Low ripple and noise level at output	Bench power supply
		ABC series • Output voltage 0-10 V up to 0-125 V • 100 Watt output power • Programmable sequencing for automated testing • IEEE488.2 interface SCPI compatable	Bench power supply

AC sources

		6000 Series - Automated AC Power Sources • 40-500Hz output frequency • 50 memories with 9 steps per memory • RS-232 interface standard - GPIB optional • Fully programmable parameters high/low limits for voltage, current and frequency	AC Power Sources
		5000 Series - Manual AC Power Sources • Range key for 0 - 150 V & 0 - 300 V • 4 LED displays to monitor voltage, current, frequency, power and power factor • 3 memory programs to store and quickly recall test programs	AC Power Sources

BOP-1kW series
• Output voltage ranges 0 ... ±10V up to0 ... ±100V
• 4 quadrant operation (source and sink)
• Output power 1000 Watt
• Voltage or current modes
• Integrated function generator

Bench power supplies

DC-AC amplifiers

		BOP-1kW series • Output voltage ranges 0 ... ±10V up to0 ... ±100V • 4 quadrant operation (source and sink) • Output power 1000 Watt • Voltage or current modes • Integrated function generator	Bench power supplies
		BOP series • ±20, 36,50, 72, 100 and 200 Volt output models • 100, 200 nd 400 Watt output power ranges • Real 4 quadrant operation (Source and Sink) • Constant voltage and current modes • Frequency range (Model dependant) from DC to 24 kHz	Bench power supply
		BOP-HV series • Output Voltage ±500 and ±1000 Volt • 40 Watt output power • 4 Quadrant operation (Source and Sink) • Constant current and voltage operation	High voltage bench power supplies
		ATE series • 50, 100, 250, 500 and 1000 Watt output power • High speed analogue programming • High speed output regulation • Low output ripple	Bench Power Supply
		ATE-DMG Series • 1000 Watt Output power • 40 step sequence program • Fast responding output regulation •Low ripple and noise level at output	Bench power supply

Analogue and switching Amplifiers
A wide range of amplifiers to cover all types or Tira vibrators Last updated: 18.08.10 17:56:35

Amplifier (Vibrators)

		3222 Series PXI-Bus wideband amplifier • 1 Channel • 1 PXI-Slot, 3U High • 20 MHz Bandwidth (full scale) • 50 MHz Small signal bandwidth (2Vss) • 40 Vp-p max. Output • Selectable output impedance 50, 75 or 600 Ohm	Wideband amplifier
		3322 Series PCI-Bus Wideband amplifier • 1 Channel • 1 PCI Slot • 20 MHz Bandwidth (full scale) • 50 MHz Small signal bandwidth (2Vp-p) • 40 Vp-p max. output amplitude • Selectable input impedance 50, 75 or 600 Ohm • Floating input and output selectable signal ground (Jumper selectable) • Low noise • Customised configuration available	Wideband amplifiers
		Modell 9250 - wideband amplifier • 2 single ended or 1 differential input • Full level signal bandwidth 15MHz • Small signal bandwith 30MHz • 40Vp-p maximum signal output amplitude • Max. slew rate 200V/µs • Low noise	Wideband amplifier
		TE9100/9200/9400 High voltage wideband amplifier • TE9100: 1 Channel • TE9200: 2 Channels • TE9400: 4 Channels • Output amplitude 300Vp-p max. • TE9400 output amplitude 400Vp-p max.	Wideband high voltage amplifiers