Corvus Packages

A system where up to 8 processes can be defined in a single data acquisition station situated remotely (over the Ethernet) up to 100m away from the workstation running Corvus. The channel count is limited only by the capability of the hardware. The data acquisition station can be positioned close to the measurement points reducing cable lengths and thus improving the signal quality.

Data Acquisition hardware: National Instruments PXIe-1082 portable 8 Slot rack with PXIe-8840 controller. A combination of up to 8 different Data Acquisition card types. Analog channel count 128.

Computer: Any PC running Windows 7 SP1 or above. 

A system where up to 6 remote data acquisition stations each running up to 8 processes can be defined. Each data acquisition station can be situated remotely (over the Ethernet) up to 100m away from the workstation running Corvus. The channel count is limited only by the capability of the hardware. The data acquisition stations can be positioned close to the measurement points reducing signal cable lengths and thus improving the signal quality.

Data Acquisition hardware: 6 x National Instruments PXIe-1082 portable 8 Slot racks with PXIe-8840 controller. A combination of up to 8 different Data Acquisition card types per rack. Analog signal channel count 768

Computer: Any PC running Windows 7 SP1 or above. 

This is a highly portable entry level system.You just need Corvus Lite,a Notebook PC and a compact National instruments USB-9234 4 channel data acquisition module and your ready to start measuring.

The USB-9234 has a switchable IEPE constant current supply built in which enables you to connect a wide range of sensors eg. Dytran Accelerometers, directly to the BNC inputs.

This is a very powerfull analyser with recording direct to disk whils displaying real time data in a wide range of plot formats.

Data Acquisition hardware: National Instruments USB-9234.

Computer: Any Portable PC running Windows 7 SP1 or above (Must support at least 1 USB port, Ethernet or Wireless). 

An extremely flexible portable system. You can add up to 32 channels as required to suite your measurement task, or you can mix 2 module types in one compaq Daq chassis as Corvus Lite supports 2 Processes.

Data Acquisition hardware: National Instruments cDAQ-9178 for USB control or cDAQ-9189 for Ethernet control. Up to 8 NI-9234 4 channel modules or a second type of CDAQ module.

Computer: Any Portable PC running Windows 7 SP1 or above (Must support at least 1 USB port, Ethernet or Wireless). 

A powerful rotating machinery analysis system that you can take to site and attach up to 32 dynamic channels or split into two processes and measure dynamic signals such as vibration and a second process for slow changing machine condition signals. Machine runups and rundown can be analysed and at the same time streamed direct to disk so that no data is lost and the data replayed for re-analysis later.

Data Acquisition hardware: National Instruments cDAQ-9178 for USB control or cDAQ-9189 for Ethernet control. Up to 8 NI-9234 4 channel modules or a second type of CDAQ module.

Computer: Any Portable PC running Windows 7 SP1 or above (Must support at least 1 USB port, Ethernet or Wireless). 

Corvus options: Option 1- Ring Buffer, Option 3- Streamed Data Storage,  Option 18-Rotor Analysis Toolkit, 

This is a feature which allows you to remotely station the data acquisition hardware and perform analysis and carry out setting up procedures over the internet. With this setup you to leave the Corvus data aquisition hardware next to a machine, visualise and store signal data from your office. This example uses a single slot chassis, but a multi-slot chassis could also be utillised for a higher channel count.

Data Acquisition hardware: National Instruments cDAQ-9181 for Ethernet control. One NI-9239 4 channel modules connected to a Shuttle bare bones PC.

Computer: Any Portable PC running Windows 7 SP1 or above connected to the Internet. 

Corvus options: Will operate with any of the standard Corvus options